SERVPRO Acts Fast to Inspect and Dry Interior and Exterior Walls for Flood Damage

5/13/2021 (Permalink)

Any size flood can bring about significant damage to your home. Whatever caused the flooding, water must be removed from all walls to ensure lingering moisture does not bring on more damage. The longer that water sits in the walls, the higher the chance you have of structural damage and mold or mildew growth.

What does SERVPRO do to dry interior and exterior walls after a flood?
After arrival onsite, our team puts a plan of action in place to address your flood damage. Our trucks are equipped with submersible portable and truck-mounted pumps that allow us to remove massive amounts of water from your basement and interior. We then remove any flood-damaged contents to begin drying the area with water extractors, dehumidifiers, and air movers.

•    For Interior Walls – Flood cuts might be required several inches above the water line so that we can remove any damaged drywall. This helps expose any pockets of the remaining water and allows us to increase airflow in small wall cavities to facilitate drying. 
•    For Exterior Walls – SERVPRO technicians use moisture sensors to locate any areas where moisture is lingering. If we detect higher moisture levels, holes may be drilled at the bottom portion of the wall to allow water to drain. A hole may also be drilled at the top of the wall to force air into the cavity, speeding moisture removal.

Our team also completes a full inspection of your home’s exterior to ensure you have ample drainage away from the building. This is important for helping to avoid future moisture damage if you have cinder block walls. Cinder block can hold moisture, which could lead to mold infestations if not addressed appropriately.

Regardless of the flood damage that you have in your area, our team at SERVPRO of Anson, Stanly, & Richmond Counties is here to help. Call us 24/7 for emergency service at (704) 474-7190.

For more about SERVPRO of Anson, Stanly, & Richmond click HERE